You light a new candle, enjoy it for an hour, blow it out, and the next time you look there is a neat little well in the middle with a thick wall of untouched wax around the sides. That is tunnelling, and it is one of the most common questions we are asked.
The good news is that it is almost always avoidable, and it mostly comes down to the very first time you light your candle.
What is tunnelling?
Tunnelling happens when the wick melts a pool of wax in the centre of the candle but never reaches the edges. Over time the candle burns straight down through the middle, leaving a ring of wax clinging to the glass.
It is a shame for two reasons. All that wax around the sides is never used, so you lose hours of burn time. And because the melt pool is smaller, less of the essential oil blend is released into the room, so the scent feels quieter than it should.
Tunnelling can also mean a candle has not been wicked correctly. If the wick is too small for the jar, the flame simply cannot melt the wax out to the edge, however carefully you burn it.
A candle has a memory
This is the part that surprises most people. Soy wax remembers. Whatever size melt pool you create on the first burn tends to become the limit for every burn after it. If the wax only melts a small circle in the middle that first time, the candle will keep following that same circle down the jar.
So the first burn really does matter more than any other.
How to avoid it
Give the first burn time
The first time you light your candle, it is important to let it burn until the melt pool reaches all the way to the edge of the jar. For our 150 g candle, this usually takes about 2 to 3 hours. Our larger 450 g candle can take a little longer. It is worth choosing a quiet evening at home for that first lighting, rather than a quick half hour before you head out.
Don't burn for too long
Equally, there is such a thing as too long. After that first burn, try not to burn your candle for more than 2 to 3 hours at a time. Any longer and the wick can start to mushroom, the flame grows larger and the glass can become too hot to touch. Blow it out, let it cool completely and relight it another time.
Trim the wick
Before each lighting, once the wax has cooled and set, trim the wick to about 5 mm. A short wick gives a steady, even flame that melts the wax evenly. A long wick tends to flicker, smoke and burn unevenly.
Keep away from draughts
Open windows, fans, doorways and busy hallways all push the flame to one side, so one edge of the wax melts while the other stays solid. Find a still, steady spot on a level, heat-resistant surface.
Keep the wax clean
Wick trimmings, spent matches and bits of dust that fall into the melt pool can disturb the flame and lead to an uneven burn. Trim the wick over a bin rather than over the jar, and give the surface a quick check before each lighting.
A little about our candles
Every York Aromatics candle is hand poured in small batches in York, using soy container wax from a UK supplier and cotton and paper wicks. We test our wicks in each jar size for both performance and safety, so the wax melts evenly to the edge. Each candle then cures for two weeks before it goes on sale, which helps the wax set and the scent settle.
A simple tip: if you light a new candle on a weekday evening, light it as soon as you sit down rather than an hour before bed. It gives that first melt pool all the time it needs.
For more on getting the best from your candle, our safety information page covers safe burning in a little more detail.
A well-loved candle should burn evenly to the last few millimetres. If you are looking for your next one, you will find all our essential oil blends in our soy candle collection.